Description
Clear built-up gunk from spa plumbing before your next refill
ProTeam Spa System Clean helps lift invisible gunk from spa plumbing and other surfaces the water touches. Use it before draining so you can clean the surfaces and start fresh with a refill.
This 1 pt (16 fl oz) bottle is the available size for a spa drain-and-refill cleaning routine. Add the full bottle as directed; a specific number of treatments is not specified in reviewed product details.
Clean the surfaces spa water touches
Over time, an invisible layer of gunk can build up inside spa plumbing and on other surfaces. ProTeam Spa System Clean is designed to lift that buildup so it can be removed when you drain the water.
Reset your hot tub between refills
Use Spa System Clean as part of a drain-and-refill process. After circulation, drain the spa, clean its surfaces, refill, and resume your normal spa start-up and daily treatment procedures.
Non-foaming, biodegradable cleansing action
ProTeam describes its cleansing action as non-foaming and biodegradable. It is intended for use on everything the spa water touches.
Follow the temperature and circulation directions
Use only when spa water is at or above 90°F. Add one bottle with the jet pump running, then let the spa circulate normally for at least 8 hours before draining.
Key Features and Benefits
- Cleans spa plumbingLifts built-up gunk from plumbing walls so it can be removed when the spa is drained.
- Cleans water-contact surfacesDesigned for surfaces the spa water touches.
- Supports a fresh refillUse during a drain-and-refill routine to reset the spa.
- Non-foamingProTeam identifies the cleansing action as non-foaming.
- BiodegradableProTeam describes the product as biodegradable.
- For large spas tooThe product directions state that one bottle works on even large spas.
Product Details
| Product Detail | Information |
|---|---|
| Brand | ProTeam® |
| Product Name | Spa System Clean Plumbing Cleaner for Hot Tubs |
| Size | 1 pt (16 fl oz) |
| Manufacturer Part Number | C005126-CS40P |
| UPC | 025551869609 |
| For Use In | Spas and hot tubs |
| Product Type | Spa system cleaner |
| Form | Not specified in reviewed product details |
| Active Ingredient(s) | Not specified in reviewed product details |
| Dosage | Add 1 bottle directly to spa water with the jet pump running; no water-volume dose is specified. |
| Treats/Coverage | For spa plumbing and other surfaces the water touches; stated to work on even large spas. Specific coverage is not specified in reviewed product details. |
| Compatible With | Not specified in reviewed product details |
| Storage | Safety information says to store locked up. |
| Hazard | Safety information signal word: Danger. Causes skin and eye irritation and may damage fertility or the unborn child. |
| Shipping Weight | About 1.3 lb |
How to Use
- Check spa temperature: Use only when spa water is at or above 90°F.
- Run the jet pump: Have the jet pump running before adding the product.
- Add the cleaner: Add 1 bottle directly to the spa water.
- Circulate: Let the spa circulate as normal for at least 8 hours.
- Drain and clean: Drain the spa and clean its surfaces.
- Refill and restart: Refill the spa, then resume normal spa start-up and daily treatment procedures.
Important Compatibility and Safety Notes
Spa Use and Compatibility
The product directions specify use in spa water and do not identify compatible sanitizer systems or other product compatibility. Compatibility with specific surfaces, chemicals, or systems is not specified in reviewed product details. Follow your container label and avoid combining products unless the label directs you to do so.
Safety First
The safety information identifies skin and eye irritation and a reproductive hazard. Wear protective gloves, protective clothing, and eye or face protection; wash exposed skin thoroughly after handling. If the product contacts skin or eyes, follow the first-aid directions on the safety information and container. Store locked up and dispose of contents and container according to applicable regulations. Keep out of reach of children and pets, and always read and follow the full label directions and precautions on your container.
Why Choose ProTeam Spa System Clean?
ProTeam Spa System Clean is designed to lift invisible gunk from spa plumbing and other water-contact surfaces before draining. Its non-foaming cleansing action fits into a drain-and-refill routine for spas and hot tubs.
Ideal For
- Spa owners preparing for a drain and refill
- Hot tub owners addressing buildup in plumbing
- Owners who want to clean water-contact surfaces before refilling
- Spa maintenance routines that include at least 8 hours of circulation
- Users seeking a non-foaming spa system cleaner
Frequently Asked Questions
What does ProTeam Spa System Clean do?
It lifts gunk from spa plumbing walls and other surfaces the water touches so the buildup can be removed when the spa is drained.
When should I use Spa System Clean?
Use it as part of a spa drain-and-refill routine, before draining the water.
How much Spa System Clean should I add?
Add 1 bottle directly to the water with the jet pump running. A water-volume dose is not specified in reviewed product details.
How long should the spa circulate?
Let the spa circulate as normal for at least 8 hours.
What temperature should the spa water be?
The product directions say to use it only when the spa water is at or above 90°F.
Can I use it in a large spa?
The product directions state that one bottle works on even large spas; a specific capacity is not specified in reviewed product details.
What should I do after circulation?
Drain the spa, clean the surfaces, refill, and resume normal spa start-up and daily treatment procedures.
Is it non-foaming?
Yes. ProTeam describes its cleansing action as non-foaming.