Description
FROG JumpH pH Increaser for Hot Tubs and Swim Spas - 2 lb Bottle
Easy pH Balancing for More Comfortable Hot Tub and Swim Spa Water
FROG JumpH pH Increaser is designed to help raise low pH in hot tubs and swim spas, making water easier to balance, more comfortable to enjoy, and better prepared for effective sanitizing. When pH drops too low, water can become acidic, which may contribute to cloudy water, reduced sanitizer performance, dry or itchy skin, and potential corrosion of hot tub or swim spa surfaces and equipment.
This 2 lb bottle is built for simple, accurate water care with the FROG TruDose Measuring Cap. Instead of searching for a separate scoop, spoon, or measuring cup, just pour into the cap, measure using the built-in markings, and dose directly into the water according to the product label. It is an easy, no-guesswork solution for routine hot tub water balancing, swim spa maintenance, and pH adjustment.
Use FROG JumpH when your test results show that pH is below the recommended range. For best results, always balance total alkalinity first, then adjust pH, then confirm hardness and sanitizer levels before soaking.
Key Benefits
-
Raises low pH: Helps bring acidic hot tub or swim spa water back into the ideal pH range.
-
Supports clearer, more comfortable water: Balanced pH helps reduce harsh-feeling water and supports a better soaking experience.
-
Helps sanitizer work properly: Keeping pH in range helps your sanitizer perform more effectively.
-
Protects spa surfaces and equipment: Proper pH balance helps reduce the risk of corrosion caused by acidic water.
-
Includes FROG TruDose Measuring Cap: Built-in measuring marks help make dosing simple and accurate.
-
Made for hot tubs and swim spas: Suitable for use as part of regular water balancing and maintenance routines.
-
Compatible with FROG systems: Works alongside FROG hot tub and swim spa sanitizing systems when used as directed.
Product Details
Compatibility and Requirements
FROG JumpH is intended for hot tubs and swim spas where pH needs to be increased. It can be used with FROG hot tub sanitizing systems, FROG swim spa sanitizing systems, or another preferred sanitizer when used according to the product label.
Before adding FROG JumpH, test the water and confirm that total alkalinity is in the proper range. FROG recommends adjusting total alkalinity first, then adjusting pH. Once total alkalinity, pH, and total hardness are balanced, sanitizer can be added or maintained as part of your normal water care routine.
For application, add FROG JumpH with the jets running while the hot tub or swim spa is not occupied. Keep the cover off while the jets run, allow the water to circulate, then retest before making additional adjustments.
How to Use FROG JumpH
-
Test your hot tub or swim spa water weekly.
-
Confirm total alkalinity is balanced between 80 and 120 ppm before adjusting pH.
-
If pH is low, check the dosing chart on the FROG JumpH bottle.
-
Pour FROG JumpH into the TruDose Cap and measure the recommended amount.
-
Add the product to the water with the jets running while the spa is not occupied.
-
Run the jets for 30 minutes with the cover off.
-
Retest after 2 hours and repeat as needed until pH reaches 7.2 to 7.6.
Frequently Asked Questions
What does FROG JumpH do?
FROG JumpH raises low pH in hot tubs and swim spas. It is used when test results show the water is too acidic and needs to be brought back into the recommended pH range.
Why is low pH a problem in a hot tub or swim spa?
Low pH can make water feel harsh, reduce sanitizer effectiveness, contribute to cloudy or green water, and may increase the risk of corrosion to surfaces and equipment.
What is the ideal pH range for hot tubs and swim spas?
The recommended pH range is 7.2 to 7.6. This range helps support sanitizer performance, water comfort, and equipment protection.
Should I adjust alkalinity or pH first?
Adjust total alkalinity first. Once total alkalinity is in the 80 to 120 ppm range, then adjust pH as needed.
Does this bottle include a measuring cap?
Yes. FROG JumpH includes the FROG TruDose Measuring Cap, which has built-in markings to help make dosing easier and more accurate.
Can I use FROG JumpH with FROG @ease?
Yes. FROG JumpH can be used as part of water balancing for hot tubs using FROG @ease or other FROG hot tub sanitizing systems. Always test first and follow the product label.