BioGuard Balance Pak 100 - 5 lb

Total Alkalinity Increaser for Stable, Comfortable Pool Water

BioGuard Balance Pak 100 is a total alkalinity increaser designed to help stabilize swimming pool water and prevent unwanted pH changes. This 5 lb size is a convenient option for pool owners who need to raise total alkalinity, improve water balance, and help protect pool surfaces and equipment from the effects of low alkalinity.

Proper total alkalinity helps buffer pool water so pH does not swing as easily from rain, swimmer load, or routine chemical additions. When alkalinity is too low, pool water can become corrosive, which may contribute to equipment corrosion, plaster etching, staining, liner wrinkling, and swimmer discomfort.

Use BioGuard Balance Pak 100 as an important first step in balanced pool care to help create more stable water, more comfortable swimming, and better overall chemical performance.

Key Benefits

• Raises total alkalinity: Helps bring low alkalinity back into the proper range.

• Helps prevent pH change: Buffers pool water to reduce sudden pH swings.

• Improves swimmer comfort: Balanced water can feel more comfortable and help reduce irritation associated with improper pH.

• Protects pool equipment: Helps reduce corrosion caused by low alkalinity and unstable pH.

• Helps protect pool surfaces: Supports prevention of plaster etching, staining, and vinyl liner wrinkling related to improper water balance.

• Quick-dissolving formula: Dissolves quickly when added directly to pool water.

• Essential water-balancing step: Helps create a more stable foundation before sanitizer, shock, or specialty chemical treatments.

Product Details

Compatibility and Requirements

BioGuard Balance Pak 100 is designed for swimming pool water balancing. It should be used when water testing shows total alkalinity is below the recommended range or when pH is difficult to stabilize.

Before applying, test pool water with a reliable test kit or test strips. Follow the product label or dosage chart to determine the correct amount based on pool volume and current alkalinity level. Run the pump during application to help distribute the product evenly.

For large adjustments, split the total treatment into smaller portions instead of adding the full amount at once. This helps prevent overcorrection and allows more accurate retesting between applications.

How to Use

Test First

Test total alkalinity before adding Balance Pak 100. Also check pH, sanitizer level, and overall water balance so you can make corrections in the right order.

Add With Pump Running

Apply the required amount directly to pool water with the pump running. Allow the product to circulate thoroughly before retesting.

Standard Dose

Use 1.5 lb per 10,000 gallons of pool water to raise total alkalinity by approximately 10 ppm. Adjust dosage based on current test results, pool size, and label directions.

Large Adjustments

If a large alkalinity increase is needed, split the total dose into thirds and add each portion about 6 hours apart. Retest before making additional adjustments.

Frequently Asked Questions

What does BioGuard Balance Pak 100 do?

BioGuard Balance Pak 100 raises total alkalinity in swimming pool water. Higher, properly balanced alkalinity helps prevent pH from changing too quickly.

Why is total alkalinity important?

Total alkalinity acts as a buffer for pH. When alkalinity is too low, pH can swing more easily, and water may become corrosive to pool surfaces and equipment.

How much BioGuard Balance Pak 100 should I use?

A standard dose is 1.5 lb per 10,000 gallons to raise total alkalinity by approximately 10 ppm. Always confirm with water testing and label directions.

Can Balance Pak 100 help protect pool equipment?

Yes. Proper total alkalinity helps reduce corrosive water conditions that can damage pool equipment, surfaces, and liners.

Should I add the whole dose at once?

For small adjustments, follow the label dosage chart. For larger adjustments, split the treatment into smaller portions and retest between additions.